Archived page. Restored from a capture of bennettoffshore.com/703.html made in March 2016. Independent archive, not the company's website. About this archive

V-703 Wind Farm Installation Support Vessel

PRINCIPAL PARTICULARS

LENGTH OVERALL75.75 m
BREADTH OVERALL38.00 m
DEPTH OF HULL7 m
LENGTH OF LEGS (including pads)95.00 m
DEPTH OF PADS1,544 mm
WIDTH OF PADS8 m
LENGTH OF PADS12.00 m
AMT OF USABLE LEG BELOW HULL (incl. pads)82.79 m
MIN. LEG LENGTH BELOW HULL - SHALLOW TRANSIT0.0 mm
CL OF FORWARD LEGS TO CL OF AFT LEGS40.00 m
CL OF PORT LEGS TO CL OF STBD LEGS30.00 m
LOAD LINE DRAFT3.77 m
LOAD LINE DISPLACEMENT9,035 tonnes


PROPULSION & STATIONKEEPING


PROPULSION POWER3,000 kW
DESIGN SPEED (SEA STATE 3)9 knots
DPII MAXIMUM ENVIRONMENT - CURRENT2.5 knots
DPII MAXIMUM ENVIRONMENT - WIND25.0 knots


QUARTERS


TOTAL ACCOMMODATIONS58 Persons
NUMBER OF ONE-PERSON ROOMS58
HOSPITAL BEDS2


CAPACITIES


SALT WATER1,265.0 m3
FUEL OIL553.0 m3
FRESH WATER471.0 m3
POTABLE WATER506.0 m3
WASTE OIL47.0 m3
CONTAMINATED DRAIN47.0 m3


MAJOR EQUIPMENT

PRIME MOVERS

4 – Cummins QSK60-D(M) turbo-charged and after-cooled engines, each rated at 1900 mechanical kW at 1,800 rpm. Each engine is fitted with a 1820 electrical kW, 690 VAC Generator.

BOW THRUSTERS

3 – Wärtsilä Lips FT175-M-D Fixed-pitch transverse thruster, thrust at 0.0 knots = 120 kN; propeller diameter = 1,750 mm; powered by 800 kW, 690 VAC electric motor with variable frequency drive, with auxiliary equipment and controls suitable for DPII operation.

STERN STEERABLE THRUSTERS

3 – Wärtsilä Lips FS175-S/WN Fixed-pitch steerable thruster, thrust at design speed of 9.0 knots = 110 kN; propeller diameter = 1,800 mm; powered by 1,000 kW 690 VAC electric motor with variable frequency drive, with auxiliary equipment and controls suitable for DPII operation.

ANCHORING EQUIPMENT

2 – Electrically driven anchor windlasses rated for 20.0 tonne nominal pull at 9.0 M per minute, 30.0 tonne stall pulling rating, 112.4 tonne brake holding rating with 435 meters of 6x37 (2- ⅜ inch – breaking strength = 249 Tonnes) wire rope.

3 – Baldt LWT 4.5 tonne stockless anchors (one spare).

CRANES

1 – AmClyde Model ATLSB-22 Liftboat leg mounted, kingpost type crane, with 600 metric ton nominal rating and a 75 meter boom. The crane is self-contained and diesel-hydraulic powered. The 75 meter bolt-connected lattice type boom will include a 60 meter basic boom and a 5 meter auxiliary jib section. The liftboat can be outfitted with an optional, smaller starboard crane.

JACKING SYSTEM

NOV BLM electrically powered jacking system composed of 40 BLM Model D15V jacking units. Each unit powers 2 load sharing elevating pinions arranged in 2 sets – 10 high at each of the four legs. Each jacking unit is driven by a 64 kW two-speed electric motor.

top of page